February 28, 2019
My impressions of fluid boxes.
Comments
(14)
February 28, 2019
My impressions of fluid boxes.
Master 16 posts
Followers: 8 people
(14)

After working on a little project created with fluid boxes I want to share some impressions and maybe present some problems. Correct me if I’m wrong anywhere in my descriptions.

I’m not going to complain about the problems, but just mention what lowered the overall good impression of this approach.

1. GROUPED OBJECTS AND “LAYER” OBJECTS.

The first thing that I don’t quite understand the purpose of is the inability to use grouped objects or to place png or jpg files on top of each other within a fluid box. I wonder if this is a conscious approach of the programming team or is it just an unsolved issue. This way or another, it limits the usefulness of fluid boxes a lot. For example, imagine I want to have a tank and a target marker in one of the fluid boxes. (If you are curious what kind of e-learning it is, I’m answering: teaching English Vocabulary for military personnel)

In a non-fluid box environment, it is very easy to achieve. I just drag two pngs from the project library and place one on top of another. But with fluid boxes, the only workaround I found is to go to a photoshop and make it one picture. Not a big deal, but if you have, say, 50 pictures it becomes a bit time consuming, and gets you out of a project for a while.  Probably nobody can help me much in this case.

2. STATE OBJECTS.

My idea was to use state objects to give the learners feedback after they answer a question. I wanted to make it more lively and inserted an object on custom states and animated  them (ones state as correct one as incorrect).   I wanted to use an advanced action to trigger the desired state (correct or incorrect) but if you insert anything on a state object, it automatically becomes unattached from the fluid box. So it works, but not within a fluid box What a pity !

3. MICRONAVIGATION

One of my favorite tricks while using text entry boxes is to apply the system variable cpCmdGoToFrame (going a few frames backward) to clear the text entry box without the necessity of reentering it. This way, as described in a few blogs here on this forum and elsewhere, you can give a user a chance to have a few attempts without leaving the slide. I found out that it doesn’t work in fluid boxes. The only workaround I found is to give feedback on another slide and return to the target slide again. But it is not so smooth as jumping from frame to frame.

So that’s what I think the missing features are. I hope someone will say, ‘hey, I checked this problem and it works on my computer’.  At least it will give me an incentive to start to investigate the proper solution.

14 Comments
2019-03-03 09:06:55
2019-03-03 09:06:55

Micronavigation is a word I invented 8 years ago in a blog, and to my amazement it has been taken over by many Captivate users.

What ou explained about resetting the TEB (another blog of many years ago) by micor-navigatino is a limitation for ALL HTML output, not only for fluid boxes. It worked perfectly for SWF output when I wrote that blog. Now you need another workaround, which I presented for the first time in a Timeline presentation couple of years ago. There is a blog as well. Let me know if you want to see the blogs.

Like
(2)
>
Lieve Weymeis
's comment
2019-03-03 20:16:42
2019-03-03 20:16:42
>
Lieve Weymeis
's comment

I really appreciate ‘micronavigation’ work you have done. It is so useful, though, not always easy to manage. Anyway, it gives the user a whole new world of usfulness.

Like
(1)
>
Piotr69
's comment
2019-03-03 22:04:42
2019-03-03 22:04:42
>
Piotr69
's comment

Yes but with less possibilities as for SWF output as I wrote.

Like
2019-03-03 09:04:21
2019-03-03 09:04:21

Stage objects. Multistate objects are in most cases the workaround for the stacking problem. Have blogged a lot about those workarounds. As long as you do not ADD objects to a state but replace them (which is best done with shapes which can have text and fill image) they work perfectly in a Fluid Box. You didn’t mention that. Converting a fluid box to a static fluid box gives you more functionality, stacking will be allowed in that case and adding objects to a state. But the fluidity of a static fluid box is not that well.

A typical example of a static fluid box is the one used for the feedback messages in the Quizzing master slides (have a blog as well about that example).

Like
(7)
>
Lieve Weymeis
's comment
2019-03-03 20:20:23
2019-03-03 20:20:23
>
Lieve Weymeis
's comment

Ok, so you mean that if I fill the shape on a new state it will work. What I did, was I dragged a new object directly from the library. Thank you for this workaround.

Like
(1)
>
Piotr69
's comment
2019-03-03 22:03:59
2019-03-03 22:03:59
>
Piotr69
's comment

It is not a workaround, you just have to switch the content in the states. There are multiple ways to do so.

Like
>
Lieve Weymeis
's comment
2019-03-04 14:18:54
2019-03-04 14:18:54
>
Lieve Weymeis
's comment

But, I think, it’s impossible with gif animations ? If I want to trigger the object state with an advanced action and make a gif play inside of the triggered state.

Like
(1)
>
Piotr69
's comment
2019-03-04 15:19:21
2019-03-04 15:19:21
>
Piotr69
's comment

I didn’t try it with GIF animations (did you mention that in the blog?).  It is possible to have an event video in each state, wonder if the same applies to animated GIF’s?

Like
>
Lieve Weymeis
's comment
2019-03-04 19:23:39
2019-03-04 19:23:39
>
Lieve Weymeis
's comment

What obviously works, is to have a couple of GIFs (in this case I have an avatar the main – neutral posture and some other feedback postures, e.g. an OK sign or shaking his head). When the answer is correct the conditional action hides neutral and shows OK posture. When the answer is incorrect the action hides neutral and shows an avatar shaking his head. It’s an equivalent, but with object states, it would be more convenient. I could copy the object and paste somewhere else a bit more easily than, say, three GIFs.

Like
(1)
>
Piotr69
's comment
2019-03-04 19:46:49
2019-03-04 19:46:49
>
Piotr69
's comment

Have no time to explore more, but since effects are not available for states, maybe animated GIF’s neither.

Like
>
Lieve Weymeis
's comment
2019-03-04 19:56:08
2019-03-04 19:56:08
>
Lieve Weymeis
's comment

GIFs also worked nicely with your concept of micronavigation. I always tray to limit jumping from slide to slide for more fluent user’s experience. So what I did, I put GIF feedbacks on a timeline and the feedback was by triggering and action with jumping to a certain frame where the certain Gif was. Nothing revolutionary, but I liked it. Unfortunately, as you mentioned, with HTML5 output it is limited.

Like
(1)
2019-03-03 09:01:09
2019-03-03 09:01:09

I will not try to anser the three questions at once but one by one in a separate commend.

Lot of what you mention I have described in my in-depth comparison of the two workflows for responsive projects:  tough choice between Breakpoints and Fluid boxes.

The inability to have stacked components is the biggest limitation. You mention only a few: grouping, stacking of images. You forget the other limitations due to the same: no objects timed for the rest of the project, objects from the main master slide cannot be inherited by the daughter master slides.

I don’t include the links here because of the moderation time needed for such a comment.

Like
(2)
>
Lieve Weymeis
's comment
2019-03-03 20:28:45
2019-03-03 20:28:45
>
Lieve Weymeis
's comment

The biggest, maybe, problem (and at the same time an advantage) of fluid boxes is their automatization. It takes a lot of your freedom. But, as I see it, it the sacrifice for having some job doe for you. Mentioning the missing features I didn’t write about, I also had problems managing texts. I had problems setting different sizes of fonts for different fluid boxes.

Like
(1)
>
Piotr69
's comment
2019-03-03 22:02:49
2019-03-03 22:02:49
>
Piotr69
's comment

You don’t have much control over font sizes in fluid boxes, as is the case for breakpoitns. You should set up object styles for different text containers, only for the highest browser resolution.

Like
Add Comment